How do manufacturers of bottle blowing air compressors correctly use oil-free turbochargers?

How do manufacturers of bottle blowing air compressors correctly use oil-free turbochargers?
An oil-free booster is a device that removes impurities such as oxygen and moisture from the air, purifies and compresses nitrogen to the required pressure. It is widely used in industries such as healthcare, pharmaceuticals, electronics, and food. The correct use of nitrogen compressors can ensure their working efficiency and safety. The following are the steps and precautions for correctly using an oil-free supercharger.
Before using an oil-free booster, the manufacturer of the bottle blowing air compressor should ensure that the surrounding environment of the compressor is clean and maintain good ventilation of the compressor. During use, it is important to always pay attention to the working status of the compressor in order to promptly identify and solve problems.
Step 1: Check the nitrogen compressor equipment
Check if the power cord of the compressor is securely connected and if there is any damage.
Check if the discharge pipeline of the compressor is smooth and free from blockage.
Check if the lubricating oil of the oil-free booster is sufficient and clean.

Step 2: Start the nitrogen compressor
Turn on the power switch of the nitrogen compressor.
Start the compressor and wait for it to reach normal operating temperature and pressure.
Check the operation status of the compressor for any abnormal noise, air leakage, etc.
Step 3: Connect the nitrogen compressor to the nitrogen storage tank
Connect the outlet pipeline of the oil-free booster to the inlet of the nitrogen storage tank.
Ensure that there is no air leakage at the connection point. Soap water can be applied to the connection point. If bubbles appear, it indicates air leakage.
Step 4: Set the pressure of the nitrogen compressor
Set the pressure setting of the oil-free booster according to the usage requirements.
Be careful not to exceed the rated working pressure of the compressor to avoid equipment damage or safety accidents.
Step 5: Start the valve of the nitrogen storage tank
With the nitrogen compressor started and running normally, open the outlet valve of the nitrogen storage tank.
Observe the working status of the nitrogen compressor to ensure normal nitrogen output.
Step 6: Stop using the nitrogen compressor
After use, close the outlet valve of the nitrogen storage tank first.
Turn off the power switch of the nitrogen compressor and stop it from running.
After the compressor has completely stopped, unplug the power plug.
When using oil-free turbochargers in daily life, the following precautions should also be taken:
Regularly inspect the exhaust pipeline of the compressor and remove any blockages.
Regularly clean and replace the filter element and nozzle of the compressor to ensure the purity of nitrogen.
Regularly check the lubricating oil of the compressor and replace or add it in a timely manner.
When the nitrogen compressor is not used for a long time, the power should be turned off and the equipment cleaned.
In short, the correct use of oil-free turbochargers can ensure their normal operation and extend their service life. During use, it is necessary to follow standard procedures and conduct regular maintenance and upkeep to ensure the purity and output quality of nitrogen. Before use, it is necessary to carefully read the user manual and comply with relevant safety regulations.