What is the working principle of a bottle blowing air compressor manufacturer？

What is the working principle of a bottle blowing air compressor manufacturer?
Blowing bottle air compressor is a device that compresses air into high-pressure gas, commonly used in pneumatic systems, refrigeration equipment, nitrogen production equipment, etc. in industrial production. Its working principle mainly includes four steps: suction, compression, release, and cooling.
Firstly, during the suction phase, the bottle blowing compressor sucks in air from the atmosphere through the intake port and sends it into the compression chamber. Usually, a filter element is installed in the bottle blowing air compressor to filter out impurities and particles in the air, ensuring the normal operation of the subsequent process.
Next, the compression stage is one of the important work steps of the medium pressure air compressor. At this stage, the exhaust valve of the compressor is closed, and at the same time, the piston or screw of the compressor begins to move, gradually compressing the inhaled air. Usually, the compression ratio of a medium pressure air compressor (the ratio of the compressed gas pressure to the initial gas pressure) will exceed 10:1 or even higher. This compression process will cause a sharp increase in the temperature of the gas.

Then, at the end of the compression stage, the release valve opens to discharge the compressed high-pressure gas from the compression chamber. High pressure gas enters the compressed air storage tank through the exhaust valve for subsequent process use. In order to ensure the normal operation of the compressor, the compressed air storage unit is usually equipped with a safety valve, and the manufacturer of the bottle blowing air compressor is responsible for preventing equipment damage caused by excessive pressure.
After the gas release stage is completed, the bottle blowing air compressor needs to be cooled. Due to the compression process causing the temperature of the gas to rise, it is necessary to cool the gas to a suitable working temperature. A bottle blowing air compressor usually installs a cooler to cool the compressed high-temperature gas to ambient temperature. The cooled gas enters the compression chamber again for the next round of compression work.
In summary, the working principle of a bottle blowing air compressor mainly includes four steps: suction, compression, release, and cooling. Through continuous cyclic operation, the bottle blowing air compressor can compress the air in the atmosphere into high-pressure gas and supply it to pneumatic equipment and other equipment that require high-pressure gas in industrial production processes.